Salicru SPS.ONE Bedienungsanleitung PDF herunterladen (Seite 26)

SALICRU

VIEWPOWER FUNCTION MENU

Battery deep-discharge protection: If enabled, the 

monitored UPS shutdown in accordance with the con-

dition of battery and load on battery mode to protect

battery. Vice versa.

Site fault detection: If enabled, the monitored UPS 

will beep when the input neutral and hot wires are

reversed. Vice versa.

P1 Programmable outlet control (battery mode): If 

enabled, when UPS is running at battery mode, it will

cut off P1 outlets after backup setting time arrive. If

disabled, UPS will provide continuous power to P1

outlets until the battery is running out.

Outlet setting: Users can set limited backup time for 

P1 outlets when UPS is on battery mode.

Battery numbers setting: 

Numbers in parallel: set battery numbers in parallel. 

Voltage and frequency range for bypass mode: Set 

acceptable voltage and frequency range in bypass

mode.

Maximum and minimum voltage: When UPS is on by- 

pass mode and input voltage is out of setting range,

UPS will enter battery mode.

Maximum and minimum frequency: When UPS is on 

bypass mode and input frequency is out of setting

range, UPS will enter battery mode.

Voltage range for ECO mode: Set acceptable voltage 

range for ECO mode.

4.2.4 Purchasing Information

Users can enter UPS purchasing date, battery purchasing

date, UPS warranty time, and battery warranty time.

Step 1• Select UPS Setting >> Purchasing Information.

Refer to Diagram 26.

Fig. 26.

Step 2• Enter data in the screen.

Step 3• Click “Apply” button to save all data.

4.3 Control

4.3.1 Real-time Control

Step 1• Select Control >> Real-time Control or click

shortcut icon . Refer to Diagram 27.

Fig. 27.

Step 2• Choose real-time control function by clicking

“Start” button on each function section.

You can real-time control the UPS by executing following

operation:

UPS turn On/Off: Click “On” to turn on the UPS and 

“Off” to turn off the UPS immediately.

Alarm Control: Click “On” to turn on alarm system and 

“Off” to turn off alarm system immediately.

Battery Self-Test: ViewPower offers three types of 

battery self-test: 10-second self-test, deep discharge

test, and self-defined self-test. Simply clicking “Start”

button from each type. It will execute the self-test im-

mediately.

Outlet Control: It will cut off P1 outlets when setting 

time arrives. When entering 0 in timer column and

click “Start” button, it will cut off outlets immediately

when UPS works in battery mode.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare

Salicru SPS.ONE Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Unterbrechungsfreie Stromversorgungen (USVs) Salicru SPS.ONE